26053313 – Dual Channel Raceway Installation

A technical diagram illustrating the installation details of a typical dual channel metal raceway for existing walls. The diagram shows a wiremold system with two main horizontal sections extending from a vertical section. The vertical section (WIREMOLD V4000) connects to an “ENTRANCE END FITTING” at the ceiling and a “RADIUSED ELBOW V4011FO W/ 1-1/4″ BEND RADIUS” to the horizontal raceway. There are spaces for wiring devices and faceplates along the horizontal raceway with specific notes on the use of such components. Instructions include providing a 1 ¼” conduit to the telecom room and ½” conduit minimum to the power panel. The design includes a note on the use of “WIREMOLD V4050 OVERLAPPING DEVICE MOUNTING PLATE (TYP.)” and “PROVIDE BLANK FACEPLATES FOR ALL TELE/DATA LOCATIONS. DO NOT USE ‘HANGING BOXES’.” The “CEILING LINE” is shown and a note that “TYPICAL RECEPTACLES ARE NEMA 5-20R (WITH GFI IF WITHIN 6′ OF SINK). The bottom of the diagram features additional instructional text about product compatibility with other manufacturers.